Concrete bag chart
How many bags a hole or a pad takes, by bag size. Rounded up, because a job half a bag short is a second trip.
Not on the chart? Work out your own: Concrete footings and slabs →
| Pour | Cubic feet | 40 lb bags | 60 lb bags | 80 lb bags |
|---|---|---|---|---|
| 10" hole, 3 ft deep | 1.64 | 6 | 4 | 3 |
| 12" hole, 3 ft deep | 2.36 | 8 | 6 | 4 |
| 4" slab, 3 × 3 ft | 3.00 | 10 | 7 | 5 |
| 4" slab, 4 × 4 ft | 5.33 | 18 | 12 | 9 |
| 6" slab, 4 × 4 ft | 8.00 | 27 | 18 | 14 |
Reading it
- A post hole holds less than the whole hole: the post takes up some of it. Subtract the post before you count bags.
- Buy one more bag than the table says. Concrete you did not need is cheaper than a second trip mid-pour.
- These are yields for standard bagged mix, as printed on the bag.
For the case this table does not cover
- Concrete footings and slabs
Cubic yards for a run of post footings or a slab, and the bags of ready-mix that buys.
- Fence calculator: post spacing
Post count and the actual on-centre spacing for any run and maximum span.
- Deck and fence takeoff
Boards, joists, posts, pickets, screws and bags of concrete, with the gaps between boards properly counted.
Other charts
- Crown molding angle chart
- Rafter length chart by roof pitch
- Roof pitch chart
- Shingle coverage chart
- Janka hardness chart by species
- Wood movement chart by species
- Closet rod and shelf height chart
- Sheet goods weight chart
- Lumber size chart: actual thickness and width
- Inch fraction to decimal chart
- Stair code quick reference
- Stud count chart
- Drawer slide clearance chart
- Cabinet door hinge chart
- Baluster spacing chart — balusters and gaps by span
- Board foot chart
- Deck board chart
- Pilot hole size chart
- Pocket hole screw chart
- Miter angle chart
- Tile quantity chart
- Paint coverage chart — gallons per room
- Dovetail angle chart
- Nail size chart by penny
- Wall anchor weight chart
- VESA pattern size chart — TV mount hole spacing
- Tap and clearance drill chart
- Shelf span chart
- Mortise and tenon proportion chart
- Compound miter chart for boxes and hoppers
- Screw and nail holding strength by species
- Bolt spacing and edge distance chart
- Door hinge placement chart